Mitsubishi Electric CITY MULTI PAC-PH01EHY-E Installationshandbuch Seite 3

6
[Fig. 6.0.5]
A
[Fig. 6.0.6]
A
<A>
[Fig. 6.0.7]
A
<A>
[Fig. 6.0.8]
B
[Fig. 6.0.9]
Cut the three cable ties and loosen the two cable straps holding the weak electrical
wiring outside the main control box.
A Cable tie
B
B Cable strap
<A> Loosen the three cable straps holding the motor wiring outside and the bottom of
the main control box.
<B> Remove the wiring from the two wire saddles.
A Cable strap
B Wire saddle
B
<B>
<A> Loosen the two cable straps holding the strong electrical wiring outside and the
bottom of the main control box.
A Cable strap
A <A>
<A> Cut the cable tie and loosen the two welding clamps holding the strong
electrical wiring at the bottom of the main control box.
A Cable tie
B Welding clamp
<A> Unscrew the two screws holding the main control box.
<A>
6.0
3