Mitsubishi Electric CITY MULTI PAC-PH01EHY-E Installationshandbuch Seite 20

9
L/XL-module
[Fig. 9.1.1.1]
[Fig. 9.1.1.2]
[Fig. 9.1.1.3]
A
20
9.1.1
A
<A>
B
<A> Remove the two screws holding the control board assy to the
control box.
A Control box
B Control board assy
A
<A> Hook the top part of the terminal block on the sheet metal of the control
board assy, and hold them together with the two removed screws.
<A>
A Terminal
B
<A>
<A> Connect the fuse wiring to CN510 on the circuit board.
A Fuse wiring
B Fuse wiring connector