Cleaning And Maintenance - Inshape 17447 Gebrauchsanweisung

functions
Press the MODE button to move through the
following displays.
TIME Displays the time spent on the
current exercise session up to
99:59 minutes and seconds.
SPEED Shows the current speed up
to 999.9 kph.
DISTANCE Shows the trained distance
up to 99.99 km for the current
training session.
CALORIES Shows the estimated calorie
consumption up to 999.9
kcal for the current training
session
SCAN Automatically switches
between the different displays
every 4 seconds
If you have chosen the SCAN display, you can
keep the display in the current parameter by
pressing the MODE button once.
You can reset the computer by removing the
batteries or pressing and holding the MODE
button for around 3 seconds.
If your computer does not display all
segments of the display properly, remove
the batteries and wait 15 seconds before
reinserting. If the segments of the display
become weak, or if your computer does not
turn on when you start using the equipment,
replace the batteries.
50

cleaning and maintenance

Wipe the equipment down regularly with a
well-wrung cloth.
Check the condition of the equipment
regularly and tighten any bolts, screws and
nuts as necessary.
Remove the batteries from the computer
if the equipment will not be used for a
prolonged period.