Assembly And Preparation - Inshape 17447 Gebrauchsanweisung

Assembly and preparation

step 1
Screw the front stabiliser (3) to the frame (1)
using bolts (80), wave washers (97), lock nuts
(98) and cap nuts (94). The "R" mark must
be on the right side of the bike so that the
wheels on the front stabiliser are pointing
forward.
Screw the rear stabiliser (2) to the frame (1)
using bolts (80), wave washers (97), lock nuts
(98) and cap nuts (94).
Turn the caps (73) on the rear stabiliser so
that the exercise bike is level and cannot tip
over.
94
98
97
94
98
97
73
2
80
73
94
98
97
76
R
76
1
3
80
step 2
Connect the sensor cables (38, 39).
Attach the computer holder (5) to the frame
(1) and screw it in place using bolts (87),
washers (96), wave washers (97) and spring
washers (98).
Screw the bottle holder (78) securely to the
computer holder (5) using screws (85).
78
85
38
5
87
98
97
87
98
97
97
38
98
87
39
1
45
GB