Ottobock 10R1 Gebrauchsanweisung Seite 8

1 Single components
For available single components refer to the catalogue.
2 Description
2.1 Indications for use
The 10R1 / 10R2=* / 10R3=* Ottobock Adapters and the 10R4=* Knurled
Plate are to be used solely for the exoprosthetic fitting of the upper extre-
mities in combination with Ottobock arm components.
2.2 Field of application
The 10R1 / 10R2=* / 10R3=* Ottobock Adapters and the 10R4=* Knurled
Plate are used for attachment of an Ottobock hook, Ottobock system hand
or passive prosthetic hand to the modular arm prosthesis.
2.3 Safety instructions
Please forward the following safety instructions to your patients:
WARNING
Risk of accident when driving a motor vehicle. The ability of prosthesis
users to drive a vehicle is determined on a case-by-case basis. Factors
include the type of fitting (amputation level, unilateral or bilateral, residual
limb conditions, design of the prosthesis) and the amputee's abilities.
All persons are required to observe their country's national and state
driving laws when operating motor vehicles. For insurance purposes,
drivers should have their driving ability examined and approved by an
authorized test center.
For maximum safety and convenience, Ottobock recommends that, at
the very least, a specialist evaluate the need for any adaptations to the
car (such as by installing a steering fork, automatic shift). Risk-free
driving should be ensured even when the prosthesis is not functioning.
8