Environmental Protection; About The Machine; Safety Signs; Identification Label - Stiga TRE224 Gebrauchsanweisung

Maintenance
• If the tank can be emptied, perform this
operation outdoors and when the motor is cold.
• To reduce the risk of fire, check for oil
and/or fuel leaks on a regular basis.
Storage
• Never leave fuel in the tank if the machine
is stored in a building where the fuel
vapours can come into contact with open
flames, sparks or sources of heat.
• Let the machine cool down
before storing it indoors.
Transport
• Transport the machine with an empty tank.

2.5 ENVIRONMENTAL PROTECTION

Protecting the environment must be a
significant and top priority for machine
use, to the benefit of civil co-habitation
and of the environemnt that we live in.
• Avoid being an element of disturbance
to the surrounding area.
• Follow local regulations closely for the
disposal of packaging, oils, fuels, filters,
worn parts or any element that strongly
impacts the environment; this waste must
not be disposed of with regular waste, but
must be separated and taken to collection
centres, who will recycle the materials.
• At the time of decommissioning, do not
leave the machine in the environment,
rather, contact a collection centre, in
accordance with local regulations in force.

3. ABOUT THE MACHINE

3.1 MACHINE DESCRIPTION
AND INTENDED USE
This machine is a spark-ignition engine
Engine performance, reliability and life
are influenced by many factors, some
external and some strictly associated
with the quality of the employed products
and with the scheduled maintenance.
Additional information is provided below
for greater awareness of your machine.
Any other use that does not comply with
the above, can be dangerous and cause
damage to people and/or property.
IMPORTANT Improper use of the machine
causes the warranty to lapse and relieves
the Manufacturer of any liability, placing all
responsibility for damage or injury, to him/
herself or third parties, on the user.
3.1.1 Type of users
This machine is intended for use by by
consumers, i.e. non-professional operators.
It is intended for "hobby-related activities"

3.2 SAFETY SIGNS

There are various symbols on the machine. Their
function is to remind the operator of the correct
conduct for use, with due care and caution.
Meanings of the symbols:
ATTENTION! The muffler may
be very hot. Do not touch.
ATTENTION! Top up the oil until
it reaches the «MAX» level. Do
not exceed the «MAX» level.

3.3 IDENTIFICATION LABEL

Write the serial number (S7n) of your
machine on the space provided on
the label at the back of the cover.

3.4 ENGINE COMPONENTS

The machine is comprised of the
following main parts (fig. 1 ).
A. Oil fillercap with dipstick
B. Carburettor
C. Air filter cover
D. Spark plug cap
E. Engine code

3.5 ENVIRONMENTAL CONDITIONS

The operation of a four-stroke
endothermic engine is affected by:
a) Temperature:
– When operating at low temperatures
cold starts may be difficult.
– When operating at very high temperatures
warm starts may be difficult due to
evaporation of the fuel in the float chamber
of the carburettor or in the pump.
3