Nice M3BAR Installierungs-Und Gebrauchsanleitungen Und Hinweise Seite 23

Declaration of conformity to be used in case the product is not installed in compliance with the criteria reported in chapter 1 .3 .1 .
and declaration of incorporation of "partly-completed machinery"
1999/5/EC (R&TTE); 2014/30/UE (EMC); 2006/42/EC (MD) annex II, part B
Note - The content of this declaration corresponds to the declaration made in the official document filed in the offices of Nice S.p.A., and
particularly the latest version thereof available prior to the printing of this manual. The text contained here has been adapted to meet edi-
torial requirements. A copy of the original declaration may be requested from Nice S.p.A. (TV) Italy.
Declaration number: 405/M-LBAR
Name of manufacturer: NICE S .p .A .
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy
Product type: Electromechanical barrier lift
Model / Type: M3BAR, M5BAR, M7BAR, L9BAR, M3BARI, M5BARI, M7BARI, L9BARI
Accessories: XBA14, XBA15, XBA4, XBA6, XBA18, XBA9, XBA7, XBA8, PS224, OVIEW Unit
The undersigned, Roberto Griffa, in the role of Chief Executive Officer, declares under his sole responsibility, that the product
specified above conforms to the provisions of the following directives:
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 9 March 1999 regarding radio equipment
and telecommunications terminal equipment and the mutual recognition of their conformity, according to the following har-
monised standards:
– Protection of health (art. 3(1)(a)): EN 62479:2010
– Electrical safety (art . 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
– Electromagnetic compatibility (art . 3(1)(b)): EN 301 489-1 V1 .9 .2:2011, EN 301 489-3 V1 .6 .1:2013
– Radio spectrum (art . 3(2)): EN 300 330-2 V1 .6 .1:2015
According to Directive 1995/5/EC (Annex III), the product is of class
• DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmoni-
sation of the laws of the Member States relating to electromagnetic compatibility (recast), according to the following stand-
ards: EN 61000-6-2:2005, EN 61000-6-3:2007+A1:2011
• DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmo-
nisation of the laws of the Member States relating to the making available on the market of electrical equipment designed
for use within certain voltage limits (recast) according to the following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 60335-2-103:2003+A11:2009, EN 62233:2008
The product also complies with the following directives according to the requirements envisaged for "partly completed ma-
chinery":
• DIRECTIVE 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 related to machinery, and
which amends the directive 95/16/EC (recast)
– I declare that the pertinent technical documentation has been prepared in accordance with Annex VII B to Directive
2006/42/EC and that the following essential requirements have been met:
1 .1 .1- 1 .1 .2- 1 .1 .3- 1 .2 .1-1 .2 .6- 1 .5 .1-1 .5 .2- 1 .5 .5- 1 .5 .6- 1 .5 .7- 1 .5 .8- 1 .5 .10- 1 .5 .11
– The manufacturer agrees to send the national authorities pertinent information on the "partly completed machinery" in
response to a motivated request without affecting its intellectual property rights .
– If the "partly completed machinery" is operated in a European country with an official language other than the language
used in this declaration, the importer must associate a translation with this declaration .
– The "partly completed machinery" must not be operated until the final machine in which it is to be incorporated is de-
clared to conform to the provisions of Directive 2006/42/EC, if applicable to it .
The parts of the product which are subject to the following standards comply with them:
EN 13241-1:2003+A1:2011, EN 12445:2000, EN 12453:2000, EN 12978:2003+A1:2009
Oderzo, 23 January 2017
APPENDIX I
CE declaration of conformity
Declaration in accordance with Directives:
Revision: 12 Language: EN
(Chief Executive Officer)
Ing . Roberto Griffa
English – 21