Using Original Parts; Operating The Filling Station; Other Applicable Documents And Regulations; Correct Use - CEMO Trolley 100l Betriebsanleitung

GB

1.1.2 Using original parts

Please only use original parts provided or
recommended by the manufacturer. Also take
note of all safety and usage information
provided with these parts.
This applies to:
• spare and wearing parts.
• parts for accessories.

1.1.3 Operating the filling station

In order to avoid any hazards due to incorrect
operation, the filling station may only be
operated by individuals who
• have read the operating instructions
• have proven their ability to operate
the equipment.
• have been assigned to operate the equipment
i
Important!
The operating instructions must be
easily accessible for each user.

1.1.4 Other applicable documents and regulations

• Operating instructions for the pump
• Operating instructions accessories,
e.g. K24 meter
• Safety data sheet of the manufacturer
for AdBlue
®
• Safety data sheet of the manufacturer
of antifreeze
• Safety data sheet of the manufacturer
of windscreen
• Country-specific regulations and laws

1.2 Correct use

Trolley 60 l and 100 l for AdBlue
The mobile filling station is used to fill vehicles
with NOx reducing agent.
The sole permissible fluid is aqueous urea
solution AUS32 (trade name AdBlue
ARLA32, ...).
Caddy 60 l
The mobile filling station is used to fill vehicles
with concentrate of antifreeze, windscreen or
dilutions of them with water.
The equipment is not intended for any other
purpose.
8
®
, DEF,
®
For safety reasons, modifications are not
allowed to the filling station (except for the
addition of accessories specially provided
by the manufacturer).
Correct usage also includes compliance with
all information in these operating instructions.

1.3 Inappropriate use

i Important!
Accordingly, inappropriate use also
includes failure to observe the notices
in these operating instructions.
F u r t h e r m o r e :
• storage and transport of liquids other
than those stipulated under Correct use,
e.g.: oils (lubricating, hydraulic, plant oils)

2. Technical data

2.1 Tank

Trolley/Caddy
Length [cm]:
Width [cm]:
Height [cm]:
Weight when empty [kg]:
Nominal volume [l]:
Total weight when full [kg]:
Environmental conditions:
Operating temperature range: -5 °C to + 40 °C

2.2 Pump

Crank pump
Actual delivery rate:
Liquid temperature:

2.3 Delivery nozzle

Connection: Hose tail 3/4"
Delivery spout: 18.8 mm
Design: Lever with locking button
60 l 100 l
90 100
53 59
38 43
15 20
60 100
80 127
approx. 0.38 l per rev.
-5 °C to + 40 °C