Operating Cautions - Sony DG110BM Bedienungsanleitung

1. Operating Cautions

. Do not use the unit in places where it may receive excessive shocks. Otherwise the inside of
the unit may be damaged or the unit may become unable to produce normal output signals.
. Be sure to turn off the power before connecting or disconnecting connectors in oder to
prevent damage or misoperation.
. DG110BM/DG110BE, probe units intended for accurate measurement, are mounted on
an optional gauge stand for use. Gauge stand DZ-501 may be used for small-dimension
measurement and DZ-531 for large-dimension measurement.
. Locate the probe (head built-in portion) at least 10 cm/3.94" away from a strong magnetic
source.
. Do not pull the cable when mounting or demounting the probe, or the cable may be
disconnected.
. Mount the probe with the spindle directed down-ward to provide the measuring force
which is caused by the weight of the spindle portion. See Fig. 1.
. The probe is not of dustproof/waterproof construction.
. The measuring force of the probe can be adjusted to the following values by mounting
optional balancer DZ-581 and changing weights.
Weights Measurig force
1.55 ± 0.15 N
Nil
1 ± 0.15 N
B
0.7 ± 0.15 N
B+A
0.3 ± 0.15 N
B+C
DG110BM/DG110BE
Fig. 1. The probe is mounted with the spindle directed downward.
DG110BM/DG110BE
Chuck the stem.
(Gauge stand DZ-531)
1
(E)