Cinema Controller Von Dpxk-Xxblp - Barco DP2K-36BLP Benutzer- Und Installationshandbuch

Eingänge und Kommunikation
Integrated Media Server (IMS)
Abbildung 8-8: IMS-Beispiel von Doremi.
Konfigurations- und Betriebsanweisungen für IMB und IMS sind in diesem Dokument nicht
enthalten. Technische Dokumentation und Support siehe Website des Herstellers des installierten
IMB/IMS.

8.7 Cinema Controller von DPxK-xxBLP

Location of the communication ports
1 2
LAN
WAN
Abbildung 8-9
Functionality
Local Area Network (LAN: 10/100/1000 base-T) port
1
Local Area Network (LAN: 10/100/1000 base-T) with built-in Ethernet switch (port 1 and port 2). Use for
projector control and automation. E.g. Touch Panel, content server, ... (not for content streaming!)
As there is a need to daisy chain projectors when they are on an Ethernet network, an Ethernet switch is
built in. the incoming network is hereby available for the internal PC and for the next device in the chain.
In this way a 'star' network interconnection can be avoided. The switch used is a stand alone 10/100/
1000Mbit Ethernet switch. This assures no influence on the network speed. Furthermore, this Ethernet
switch remains operational when the projector is in Standby mode.
The connectors used for these Ethernet ports are of the type RJ45, which is compatible with standard
RJ45 cable connector. Straight (most common) as well as cross linked network cables can be used. The
2 ports are functionally identical. Both ports are connected via the projector switch (Auto sensing
enabled).
112 R5906753DE /07
DVI IN A DVI IN B
DPxK BLP series
3 4 5 6
RS 232 IN 3D INTERFACE
USB 2.0 GENERAL INTERFACE I/0
7
PERIPHERAL PORT