Cebora POWER ROD 180 M Bedienungsanleitung Seite 6

INSTRUCTION MANUAL FOR ARC WELDING MACHINE
IMPORTANT: BEFORE STARTING THE EQUIPMENT,
READ THE CONTENTS OF THIS MANUAL, WHICH
MUST BE STORED IN A PLACE FAMILIAR TO ALL US-
ERS FOR THE ENTIRE OPERATIVE LIFE-SPAN OF THE
MACHINE.
THIS EQUIPMENT MUST BE USED SOLELY FOR WELD-
ING OPERATIONS. 1 PRECAUZIONI DI SICUREZZA
2 SAFETY PRECAUTIONS
WELDING AND ARC CUTTING CAN BE
HARMFUL TO YOURSELF AND OTHERS.
THE USER MUST THEREFORE BE EDUCATED AGAINST
THE HAZARDS, SUMMARIZED BELOW, DERIVING
FROM WELDING OPERATIONS. FOR MORE DETAILED
INFORMATION, ORDER THE MANUAL CODE 3.300.758
RUMORE.
This machine does not directly produce noise ex-
ceeding 80dB. The plasma cutting/welding pro-
cedure may produce noise levels beyond said
limit; users must therefore implement all precautions re-
quired by law.
ELECTRIC AND MAGNETIC FIELDS- May be dangerous.
· Electric current following through any con-
ductor causes localized Electric and Mag-
netic Fields (EMF). Welding/cutting current
creates EMF fields around cables and pow-
er sources.
· The magnetic fields created by high currents may affect
the operation of pacemakers. Wearers of vital electronic
equipment (pacemakers) shall consult their physician be-
fore beginning any arc welding, cutting, gouging or spot
welding operations.
· Exposure to EMF fields in welding/cutting may have oth-
er health effects which are now not known.
· All operators should use the followingprocedures in or-
der to minimize exposure to EMF fields from the welding/
cutting circuit:
- Route the electrode and work cables together
- Secure them with tape when possible.
- Never coil the electrode/torch lead around your body.
- Do not place your body between the electrode/torch-
lead and work cables. If the electrode/torch lead cable
ison your right side, the work cable should also be on
yourright side.
-Connect the work cable to the workpiece as close as
possible to the area being welded/cut.
- Do not work next to welding/cutting power source.
EXPLOSIONS
Do not weld in the vicinity of containers under
pressure, or in the presence of explosive dust,
gases or fumes. · All cylinders and pressure reg-
ulators used in welding operations should be handled
with care.
ELECTROMAGNETIC COMPATIBILITY
This machine is manufactured in compliance with the in-
6
structions contained in the standard IEC 60974-10 (CL. A),
and must be used solely for professional purposes in
an industrial environment. There may be potential dif-
ficulties in ensuring electromagnetic compatibility in
non-industrial environments.
DISPOSAL OF ELECTRICAL AND ELECTRONIC
EQUIPMENT
Do not dispose of electrical equipment together with
normal waste!in observance of european directive
2002/96/ec on Waste Electrical and Electronic equipment
and its implementation in accordance with national law,
electrical equipment that has reached the end of its life must
be collected separately and returned to an environmentally
compatible recycling facility. as the owner of the equipment,
you should get information on approved collection systems
from our local representative. By applying this european di-
rective you will improve the environment and human health!
IN CASE OF MALFUNCTIONS, REQUEST ASSISTANCE
FROM QUALIFIED PERSONNEL.
1.1 WARNING LABEL
The following numbered text corresponds to the label
numbered boxes.
B. Drive rolls can injure fingers.
C. Welding wire and drive parts are at welding voltage
during operation — keep hands and metal objects
away.
1 Electric shock from welding electrode or wiring can