Smart Flush Function Programming; Sailing Or Mooring Mode - Tecma Privilege Bedienungs- / Installations- / Wartungshandbuch

Operation/installation/service manual
Manuale di utilizzo / installazione / manutenzione
X-light / Privilege/ Evolution/ Breeze/ E-Breeze/ Silence Plus 2G/ Elegance 2G
2.5.3

SMART FLUSH function programming

2.5.3.1

Sailing or Mooring mode

Set the system to sailing mode if you plan on sailing often. The toilet will remain empty after
use. Only a small amount of water will be added to create a water trap. This will avoid accidental
water spilling caused by motion of the vessel during navigation.
SAILING MODE: the toilet bowl remains empty at the end of the flush cycle
1. The bowl
2. Press the BEFORE USE
is empty
button before using the toilet.
The solenoid valve will let in
the desired amount of water
for max 12 seconds.
Set the system to mooring mode if you plan on docking for a long period of time. Water will
remain in the toilet after use allowing you to flush by pressing a single button.
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy-
Manual rev1.6.2015 1111111111111111
MACERATOR TOILETS
TOILET MACERATRICI
. Press the AFTER USE button after
3
using the toilet.
A combined action of the solenoid
valve and macerator pump will clean
and rinse the bowl. A small water trap
is created and the toilet bowl will
remain empty.
www.thetfordmarine.com
111111111111111111111
48