Operating The System; All-In-One Control Panel; One Button; After Use - Tecma Privilege Bedienungs- / Installations- / Wartungshandbuch

Operation/installation/service manual
Manuale di utilizzo / installazione / manutenzione
X-light / Privilege/ Evolution/ Breeze/ E-Breeze/ Silence Plus 2G/ Elegance 2G
2.0

OPERATING THE SYSTEM

2.1

All-in-one control panel

2.1.1 One button

Press the "AFTER USE" button to start the automatic flush cycle, after which the toilet will be
refilled with a small amount of water, ready for the next use.

2.1.2 Two buttons

Press the "BEFORE USE" button before using the toilet. This will fill the toilet with a small amount
of water. Press the "AFTER USE" button after using the toilet. This will start the automatic flush
cycle, which will empty the toilet.

BEFORE USE

NOTE: The All-in-one control panel allows you to adjust the amount of water used during the
flushing cycle. A regulator placed at the back of the panel increases the amount of water if turned
clockwise, or decreases it if turned anticlockwise. The recommended water level is 1 cm above the
ceramic outlet.
TECMA SRL – Via Flaminia / Loc Castel delle Formiche/ 05030 Otricoli (TR) / Italy-
Manual rev1.6.2015 1111111111111111
MACERATOR TOILETS
TOILET MACERATRICI

AFTER USE

TANK LEVEL
www.thetfordmarine.com
111111111111111111111
AFTER USE
TANK LEVEL
42