Solaris: Double Loading; Gold Weights; Disclaimer; Care And Maintenance - DeguDent Solaris Gebrauchsanweisung

14. Solaris: Double loading

• The cathode (colour-coded in black) with the two identical ends is used for the desired double loading.
• The desired layer thickness is the same for both crowns.
• The object type is determined as per the table below.
Type 1 Type 2 Type 3
Type 1 Type 3
Type 2 Type 4 Type 4
Type 3 Type 5 Type 5 Type 6
Type 4 Type 5 Type 6 Type 6
Type 5 Type 6 Type 6 Type 7
Type 6 Type 7 Type 7 Type 8
Type 7 Type 8 Type 8

15. Gold weights

• The following weights are electrodeposited for the object types:
Weights (g)
Object type 200 µm 250 µm
1 0.23 0.29
2 0.29 0.36
3 0.38 0.47
4 0.48 0.60
5 0.62 0.77
6 0.81 1.01
7 1.06 1.33
8 1.20 1.50
32
Type 4 Type 5 Type 6
Type 7
Type 7 Type 8
Type 8 X X
X X X X
300 µm
0.35
0.44
0.57
0.73
0.93
1.22
1.59
1.80

16. Disclaimer:

• The manufacturer accepts no liability for damage caused by arbitrary changes, inappropriate use
or any other use not in accordance with the Operating Instructions.

17. Care and maintenance:

Type 7
• Check the device regularly for mechanical damage. In this way, you will prevent accidents and
breakdowns.
• Completely remove contaminants from the device, the anode and the heating system.
Only by doing this can the components be guaranteed to work properly.

18. Troubleshooting:

• See the Error Messages chapter in the Operating Instructions for the device.
X
33