Troubleshooting - Waeco PerfectCharge CA360 Montageanleitung

Troubleshooting

9 Troubleshooting
The "Status" LED (fig. 1 2, page 3) displays the fault:
LED display
Red, slowly flashing
Red, slowly flashing
Red, permanently lit
NOTE
I
If you have detailed questions on the battery specifications,
please contact the battery manufacturer.
42
Cause
Battery undervoltage or bat-
tery overload
Defective battery
Overheating
Short circuit or reversed polar-
ity
Perfect Charge CA360
Remedy
Check the battery.
Switch the battery charger off and on
again.
Replace the battery.
Improve the ventilation of the battery
charger or battery.
Make sure that no ventilation open-
ings are covered.
If necessary, reduce the ambient
temperature.
Connect the battery charger with the
correct polarity.
Rectify the short circuit.
Check if the fuse has triggered and
replace it if necessary.
EN