Waeco PerfectCharge CA360 Montageanleitung Seite 38

Installing the device
Using with a LIN bus and battery sensor
You can find a sample wiring diagram for using the device with a LIN bus and
battery sensor in fig. 4, page 4.
No. in
fig. 4, page 4
1
2
3
4
5
The LIN bus plug pins are assigned as follows:
Pin in
fig. 5, page 5
1
2
3
If the LIN bus communication between the display and the battery charger is
disrupted, the battery charger switches to Master mode after 10 seconds.
The battery charger uses the configuration that was last saved for the battery.
38
Explanation/function
Consumer
LIN Bus Control System
Battery sensor
Battery
Fuse
Allocation
BATT +12V
LIN Bus Data I/O
BATT GND
Perfect Charge CA360
EN