Switching The Infrared Controller; Activating The Dimming Function For The Light/Fan - Sentiotec infrabox Montage- Und Gebrauchsanweisungen

Instructions for use for the user
WARNING!
Risk of fire
● Before the infrared controller is switched on, make sure that no flam-
mable objects have been hung over the infrared heater or on the
infrared plate.

9.2. Switching the infrared controller

1. Press the ON/OFF switch 3, to switch on the infrared controller.
► The light/fan and the infrared heater/infrared plate display lights up.
2. Using Mode button 4, you can select between the intensity control for infrared
heater/infrared plate 6 and light/fan 5.
3. Select the intensity of the function with the intensity selector 1 and 2.
► The infrared heater/the infrared plate begins to heat up.

9.3. Activating the dimming function for the light/fan

You can control (dim) the light or fan in 5 levels. At 0 the light/fan is switched off,
at 5 it is a full capacity.
1. Press the Mode button 4.
► The light symbol for light/fan 5 lights up.
2. Use the intensity selector 1 and 2 to set the preferred intensity of light.
► The light operates at the level of intensity selected.
p. 36/44