Switching on/off / Selecting a heat level
■
When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch 3 and select the output level:
–
"0"
–
"1"
–
"2"
■
You switch the appliance off by sliding the level switch 3 to the position "0"
(= appliance off) .
■
To fix the styling, you can use the slide switch Cool Shot 2 . The styling will
be fixed by the cool air stream:
–
During operation, slide the slide switch Cool Shot 2 upwards .
The air flow will be cooler .
–
When you want to deactivate the cool air stream, slide the slide switch
Cool Shot 2 downwards .
Using the attachments
Large round brush q
This attachment gives the hair more volume or large curls .
■
Wind a slightly damp strand of hair around the large round brush q .
■
Switch the appliance on at level 1 or 2 .
■
When the strand is dry, slide the slide switch Cool Shot 2 upwards .
Wait until the strand has cooled .
■
Unwind the large round brush q from the strand .
■
Proceed with the other strands in the same way .
Small round brush 0
With this attachment you can put curls or waves into your hair .
■
Wind a slightly damp strand of hair around the small round brush 0 .
■
Switch the appliance on at level 1 or 2 .
■
When the strand is dry, slide the slide switch Cool Shot 2 upwards .
Wait until the strand has cooled .
■
Unwind the small round brush 0 from the strand .
■
Proceed with the other strands in the same way .
SWC 1000 D1
The appliance is switched off
for a reduced air-flow strength with heat
for a high air-flow strength with heat
GB │ IE
│
23
■