Switching On /Off / Selecting A Heat Level; Using The Attachments; Large Round Brush; Small Round Brush - Silvercrest SWC 1000 C1 Bedienungsanleitung

Switching on /off / Selecting a heat level

Using the attachments

Large round brush

Small round brush

SWC 1000 C1
Downloaded from www.Manualslib.com
■ When you have inserted the required attachment and connected the plug
with the mains power socket, you can now switch the appliance on with the
level switch and select the output level:
– "0" The appliance is switched off
– "1" for a reduced air-flow strength with heat
– "2" for a high air-flow strength with heat
■ You switch the appliance off by sliding the level switch
(= appliance off).
■ To fix the styling, you can use the slide switch Cool Shot
be fixed by the cool air stream:
– During operation, slide the slide switch Cool Shot
The air flow will be cooler.
– When you want to deactivate the cool air stream, slide the slide switch
Cool Shot downwards.
11
This attachment gives the hair more volume or large curls.
■ Wind a slightly damp strand of hair around the large round brush
■ Switch the appliance on at level 1 or 2.
■ When the strand is dry, slide the slide switch Cool Shot
Wait until the strand has cooled.
■ Unwind the large round brush
■ Proceed with the other strands in the same way.
10
With this attachment you can put curls or waves into your hair.
■ Wind a slightly damp strand of hair around the small round brush
■ Switch the appliance on at level 1 or 2.
■ When the strand is dry, slide the slide switch Cool Shot
Wait until the strand has cooled.
■ Unwind the small round brush
■ Proceed with the other strands in the same way.
manuals search engine
to the position "0"
. The styling will
upwards.
upwards.
from the strand.
upwards.
from the strand.
.
.
│ 9 ■
GB