General Information; Information Regarding; Operating Instructions; Symbol Explanation - oventrop Unibox RLA Einbau- Und Betriebsanleitung

1. General information

1.1 Information regarding operating
instructions
These installation and operating instructions
help the specialist tradesman to install, put
into operation and service the "Unibox RLA".
Before installation, the installation and operat-
ing instructions are to be read in their entirety

1.2 Symbol explanation

Safety guidelines are displayed by symbols.
These guidelines are to be observed to avoid
accidents, damage to property and malfunc-
tions.
DANGER!
Imminent danger to life and limb!
Attention!
Possible dangerous situation for product,
system and environment
Note!
Useful information and notes!

1.3 Copyright

The installation instructions as well as the
included texts, drawings, images and other
illustrations are copyrighted.

2. Safety notes

The "Unibox RLA" has to be installed by an
authorised specialist tradesman with due
consideration of valid standard and rules. We
do not accept liability for damages or
malfunctions caused by nonobservance of
these instructions
WARNING ! Risk of scalding !
Hot escaping fluids may lead to bad scalds.
The valve and the pipework may get very
hot and lead to bad scalds, too. Wear
safety gloves or inactivate heating system
before work commences

3. Technical data

3.1 Dimensions

Depth: 57 mm
8
Installation and operating instructions
Illustr. 3.1 Dimensions "Unibox RLA"

3.2 Performance data

Max. operating pressure:
Max. differential pressure:
Max. operating temperature: 100°C

4. Construction and function

4.1 Summary

1. Isolating valve
2. Venting valve
3. Compression fitting G
4. Cover
4
2
Illustr. 4.1 Summary "Unibox RLA"

4.2 Functional description

The "Unibox RLA" is an installation set fort he
isolation of surface heating circuits in con-
junction with "Uniboxes".
"Unibox RLA"
10 bar
1 bar
3
⁄ cone "Euro"
4
1
3