Polar CS300 Gebrauchsanleitung Seite 10

4. WHEEL SIZE
Wheel size settings are a prerequisite for accurate cycling
information. To measure size, choose one of two methods:
METHOD 1
1. Find the wheel diameter printed on the frame.
2. Match the diameter in inches or in ETRTO to wheel size in
millimeters on the right side of the chart. Note that wheel sizes
in the above chart are approximate, as wheel size depends on
wheel type and air pressure.
METHOD 2
1. Starting with the valve stem exactly at the bottom with a
mark on the ground, move your bike on a flat surface straight
ahead for one complete wheel rotation. The tire should be
perpendicular to the ground. Mark the point at which the valve
stem is exactly at the bottom again.
2. Measure the distance between the two marks and subtract 4 mm to account for your weight on the bike. This is the wheel circumference,
and the value to use in your cycling computer.
ETRTO Wheel size diameter
(inches)
25-559
26 x 1.0
23-571 650 x 23C
35-559
26 x 1.50
37-622 700 x 35C
47-559
26 x 1.95
20-622 700 x 20C
52-559 26 x 2.0
23-622
700 x 23C
25-622 700 x 25C
28-622
700 x 28
700 x 32C
32-622
42-622 700 x 40C
700 x 47C
47-622
Note
depends on the wheel type and air pressure.
Wheel size setting
(mm)
1884
1909
1947
1958
2022
2051
2054
2070
2080
2101
2126
2189
2220
11