ratiotec S 200 Bedienungsanleitung Seite 6

[EN]
Error messages S 200 | S 225 | S 275
The rapidcount S is a reliable banknote counter. Nevertheless, error messages can occur, according to the fact that
especially suspicuos banknotes are checked. As described in the previous chapter, the banknote counter automati-
cally configures each time it is turned on. This includes, among other things, a test of all sensors.
Error codes
SKEW BANKNOTE
DOUBLE NOTE
MOTOR PROBLEM
PROBLEM WITH HOPPER SENSOR
PROBLEM WITH STACKER SENSOR
PROBLEM WITH MG SENSOR
PROBLEM WITH UV SENSOR
PROBLEM WITH COUNTING SENSOR LEFT
PROBLEM WITH COUNTING SENSOR RIGHT
SUSPECT BANKNOTE
DIFFERENT DENOMINATION
BATCH FULL
6
Action
Please remove all banknotes and count again.
Please remove all banknotes and count again
Turn off and check the banknotepath.
Turn off, check sensor and try again.
Turn off, check sensor and try again.
Turn off, check sensor and try again.
Turn off, check sensor and try again.
Turn off, check sensor and try again.
Turn off, check sensor and try again.
Please check last banknote in stacker.
Please remove last banknote and press start.
Please remove batch of banknotes or press start to count next batch.