ratiotec S 200 Bedienungsanleitung Seite 5

6. BATCH: _____________ The bundle function allows you to count an exact number of banknotes as a
7. +1 | +10: ___________
+1: _________________ Increase the bundle quantity +1.
+10: _______________
8. CLEAR: _____________
9. START: _____________
Short keypress: ______
Long keypress: ______
10. RESET: _____________
11. AUTOSTART: ________
Operation
Connect the mains cable and switch the machine on. The machine will now run a self-test. After the test is success-
fully completed, the device is ready for use.
Fan the banknotes slightly and place the counted banknote stack roughly sorted into the middle of the banknote
feeder. When autostart is activated, the banknote counter automatically starts counting after about 2 seconds. For
manual start, please press the START button. The banknotes are counted and transported via the banknote ejector
in the storage compartment. The counting result can be read off the display.
Max. 80 Stk.
bundle, e.g. bank wrapper. The function is activated using the BATCH button.
You can select from a series of predefined values: 100 | 50 | 20 | 10 | 5 | 0. Is the
banknote counter set on a bundle amount from e.g. 20 banknotes set, it stops
automatically after these were counted.
If you want to count another amount of banknotes, press the +1 | +10 button to
increase the preset value step by step.
Increase the bundle quantity +10.
Deactivate bundle function.
Start counting process | autostart.
Start counting process | restart counting process when counterfeit money is re-
ported or in case of error message.
Opening of the user menu (language setting, autostart, Factory setting, device
information).
Press the RESET button to exit the user menu.
A long press of the START button takes you to the Menu item "Autostart" to acti-
vate | deactivate the automatic counting start of the device.
[ EN]
5