[En] Instructions Manual Rapidcount S; Front Side; Rear Side - ratiotec S 200 Bedienungsanleitung

Instructions Manual rapidcount S
Dear customer,
Thank you for choosing a banknote counter from ratiotec's rapidcount S series. Please find further information
about the software update for new Euro banknotes at the end of this manual and on our homepage.
The rapidcount S consists of the following three models:
1. rapidcount S 200: Piece counter | Counterfeit detection: UV | MG
2. rapidcount S 225: Value counter | Counterfeit detection: UV | SD
3. rapidcount S 275: Value counter | Counterfeit detection: UV | IR | MG | SD
Please read this manual carefully to ensure a smooth and fault-free operation. The ideal counting capacity is limited
to 0,8 million banknotes per year. We additionally recommend an annual maintenance of the product.
Note: Please make sure to insert only a maximum of 80 pieces of banknotes into the banknote feeder. The
banknotes should be inserted in a central position possibly sorted by size and slightly fanned out into the
banknote feeder.

Front side

1. Feeder rails: Adjustable banknote feeder
2. Banknote feeder
3. Display
4. Banknote ejector
5. Banknote stacker

Rear side

1. Adjusting screw for banknote feeder
2. Connection for updates
3. ON/OFF switch
4. Connection for printer RS 232 (S 200, S 225, S 275)
5.
Connection for the mains cable
1.
2.
3.
4.
5.
1.
3.
2.
4.
5.
[ EN]
3