Control Panel - ratiotec S 200 Bedienungsanleitung

[EN]

Control Panel

1. MODE: _____________
Mix: _______________
Sort: _______________
Check: _____________
Count: ______________ Counting of sorted banknotes without counterfeit detection, for foreign curren-
2. ADD: _______________ Activate or deactivate the function ADD.
No: ________________
Yes: ________________ The counting result will be saved. Each further counting procedure is added to
3. REPORT: ____________ (S 225/ S275) Pressing the button again or starting a new count will return you
4. PRINT: _____________
5. CURR: ______________ Change currency (if available).
4
1.
MODE
2.
ADD
3.
REPORT
4.
PRINT
Selection of counting modes.
(S 225 | S 275) Counting of unsorted banknotes including value counting and
counterfeit detection.
(S 225 | S 275) Counting of sorted banknotes including value counting and coun-
terfeit detection, e.g. counting a stack of 10 Euro banknotes. The value and the
number of inserted banknotes are determined. The first banknote (banknote on
the bottom of the stack) serves as reference value. In case of the inclusion of fo-
reign banknotes, which are not according to the reference value, an error-signal
occurs and stops the device immediately. The foreign banknote can be removed
from the banknote ejector and you can continue counting with the START button.
(S 200) Counting of sorted banknotes including counterfeit detection. The first
banknote counted is used as a reference value – if a smaller banknote (up to 50
Euro) is detected, the device stops automatically and the banknotes are recog-
nized as wrong.
cies. The detection is not activated.
Once the counting procedure is completed, the result is deleted as soon as you
remove all the banknotes from the banknote stacker.
the previous counted value. The added value is deleted by pressing the RESET
button.
to the normal display mode. Pressing the REPORT button will display the count
results on the display. When you insert the banknotes, you will see the number
of pieces and the sum of the individual types of banknotes during the counting
process.
(S 225/S 275): Print counting result via optionally available thermal receipt prin-
ter RTP 300. Is a receipt printer conntected to the printer port of the banknote
counter, a receipt can be printed by pressing the PRINT button.
The currency is shown on the display next to the CURR button, e.g. EURO. Press
the CURR button to return a step back within the user menu.
5.
CURR
9.
START
BATCH
7.
10.
+1/+10
RESET
8.
CLEAR