Troubleshooting; Electric Shock - ACO Haustechnik Multi Control Gebrauchsanleitung

Grease layer thickness measuring device Multi Control

Troubleshooting

7 Troubleshooting
Display of malfunctions,
For safe and trouble-free operation, only original spares from ACO are permitted,
Introduction „ACO Service".
For repairs and spare part orders: quote the Serial Number and Article No.
66/ 72
WARNING

Electric shock

Work on electrical connections must be carried out by qualified electricians
■
only.
Disconnect the evaluation device from the power supply before
■
troubleshooting.
CAUTION
Risk of infection in cases of improper sanitary installation
Work on the grease layer thickness measuring device must only be carried
■
out by qualified personnel,
Avoid contact with waste water and wear protective gloves.
■
Burns due to hot surfaces
The sensor is heated in the measurement range and can reach 95 °C.
■
Chapter 5.2.2. "Explanation of the operation".
Chap. 1.2 "Personnel qualifications".