Casualplay Multiprotector FIX Anweisungen Seite 22

backrest, the child's safety will be affected.
MULTIPROTECTOR FIX connector folding mechanism
NOTE: The FIX connectors of the MULTIPROTECTOR FIX child restraint
system can be folded.
Press the red button and gently lift it to release the fastening mechanism.
•
Keeping it pressed (fig.5), turn either of the 2 connectors downwards.
Release the button and continue turning (fig.6). When the connectors reach
•
the maximum folding position (180º), the mechanism will lick locked again.
To unfold the connectors again, repeat the same operation until they click
•
into place again.
NOTE: The MULTIPROTECTOR FIX can be installed on the front passenger
seat or on the back seat of the vehicle, with the three-point seat belt of the
vehicle and the option of the FIX connectors.
Installing the MULTIPROTECTOR FIX when the vehicle is fitted with ISOFIX
fasteners
Remove the headrest from the seat on which the child restraint system is
•
going to be installed (fig.7).
Position the clips in front of both ISOFIX slots, which are situated between
•
the seat and the backrest (fig. 08).
NOTE: If the vehicle came supplied with these connectors, it is not necessary
to assemble them.
Then press either the right or left side button (fig.9) and keeping it pressed
•
pull the connector bar outwards (fig.10)
Locate the ISOFIX fasteners and line the MULTIPROTECTOR FIX up with
•
them (fig.11-12).Press the safety seat with both hands towards the fasteners
until a click indicates that both sides have been fastened correctly (fig.13).
Make sure that the system has been installed correctly by checking that
•
there is a green line on the top part of the connector release devices
(fig.14). If one of the connectors displays a red signal this means that it is
not fastened correctly, complete the operation again.
Lastly, adjust the space between the MULTIPROTECTOR FIX and the
•
backrest of the vehicle by pressing either of the two side buttons on the
base, and pushing it firmly against the backrest (fig.15).
Adjusting the height of the backrest
20