Overheating Protection - CO/Tech D002F-UK Original Bedienungsanleitung

Operating instructions
The appliance is equipped with an electronic thermostat
which switches the appliance on and off to regulate
the temperature. When the temperature in the room drops,
the thermostat switches the appliance on and when
the temperature in the room has reached the set temperature
the thermostat switches the appliance off.
Make sure that the thermostat is set correctly.
1. Set the power switch to 1, turn the thermostat knob
clockwise to turn the appliance on and warm the room up
to the desired temperature.
2. Check the temperature setting.
3. Once the desired temperature has been reached, slowly
turn the thermostat knob anticlockwise until a "click" is
heard, indicating that the appliance has been switched off.
4. The operation of the appliance and the temperature
of the room should be checked regularly. Bear in mind
that the outdoor temperature varies and subsequently
the indoor heating requirement.
Note: You, the user, bear full responsibility for ensuring that
nothing freezes.
The thermostat will now automatically maintain a constant
temperature. Note: This is dependant, of course, on the size
of the room, climate and outside temperature.

Overheating protection

The appliance is fitted with an overheating protection device
to prevent fires. The appliance will automatically be shut off
if it becomes too hot. The appliance should be left to cool
down and after about 20 minutes it will switch back on again
and work as normal.
8