How To Get A Professional Ironing Finish - Fakir GLARE Benutzeranleitung

GLARE GB

How to get a professional ironing finish

A normal iron generates only a small quantity of steam. In this case it is necessary to
produce steam constantly in order to eliminate crease in the fabric being ironed.
A professional ironing system works rather differently. The fabric is first made
Damp by the steam and then, in a second phase, dry-ironed in the normal way. This
means that every. Tiniest crease is removed and your garments are ironed to
perfection.
In the first phase (steam-damping of the fabric),hold the iron about 20 cm. above
The fabric and press the steam(10). Pass the iron over the garment in a circular
movement so that the powerful jet of steam damps the fabric. Lightly creased garments
require only a few moments of steaming. While very heavy fabrics or garments with
particularly difficult creases must be damper, so steam must be applied for a few
seconds more. During the second phase (dry ironing), check that the thermostat knob
is in the correct position for the type of fabrics; release the steam button(10) and
dry-iron the garment. The special ironing plate will prevent the fabrics from becoming
shiny. Using this ironing technique, and following the suggestions in the chart above,
you will find it easy to give your garments a really professional ironing finish.
23