How To Fill The Boiler While The Appliance Is Being Used - Fakir GLARE Benutzeranleitung

ATTENTION!
Never allow the steam to flow out of the iron
whilst it is resting on the stand provided (8).
• If the jet of steam decreases while you are ironing, the boiler tank is running out of
water.
ATTENTION!
The boiler is always under pressure!

How to fill the boiler while the appliance is being used

• Switch off the boiler(4). Select the desired temperature "MIN" by turning the thermostat
knobs (9).
• Release the pressure left in the boiler, keeping the steam button(10) on the iron
pressed down until no more steam comes out of the plate. Then switch off the iron (5).
• Unplug the power cord from the wall socket.
• Wait for the iron and the boiler to cool down.
• Unscrew the cap and wait a few minutes.
• Slowly pour 1.0 litres of water into the opening always using the funnel provided.
• Close the boiler and fully tighten the cap.
• Press the boiler switch(4).
• Wait for steam pilot lamp (6)to light up before continuing ironing.
CAUTION!
Never attempt to open the cap while the boiler is under
pressure.Never unscrew the boiler cap when the
appliance is connected to the outlet.
GLARE
21
GB