Technical Information; Filling Up The Water Reservoir; Steam Ironing - Fakir MERCY Benutzerhandbuch

Technical Information

2200 Watt
220-240 V~
50/60 Hz
Its service life is 7 years

Filling up the water reservoir

NOTE!
Steam iron is designed for use with tap water, but if your water is very hard, it is
recommended to use purified water. The water reservoir must be drained after each use.
NOTE!
If you shall empty the water reservoir after cooling the steam iron, bring the iron to the
upright position by laying it on its back, plug the iron and wait for 2 minutes until it heats
by bringing the temperature adjustment knob to maximum position. Unplug the steam iron.

Steam Ironing

Bring the temperature adjustment knob to " . ." or "..." position. Set the variable steam control to
the desired position.
Unplug the iron before filling the water reservoir
Hold the steam iron in horizontal position. Pour the water slowly
from
the water filling inlet. To prevent water from overflowing, do not
pour water
more than the mark on the water reservoir.
25
EN