NOTE!
if you empty the water tank after the steam iron has
cooled down, set the steam iron upright position on its
heel rest, plug it in and set the temperature control dial
to the maximum position, heat for 2 minutes. Unplug
the steam iron from the power supply.
Steam Ironing
Set the temperature control dial to the ".." or "..." position. Set the variable steam
control to the desired position.
CAUTION!
Avoid coming in contact with ejected steam.
Burst Of Steam
The burst of steam feature provides additional steam for removing stubborn wrinkles.
Turn the temperature control to ".." or "..." position. Turn the variable steam control to
the maximum position. Press the powerful steam button to release the burst of steam.
NOTE!
To prevent water leakage from the soleplate, do not
keep the powerful steam button pressed for more than
5 seconds.
FORTE
Spraying
As long as there is enough water in the water tank, you may use
the spray button at any temperature setting during steam or dry
ironing.
Press the spray button several times to activate the pump while
you are ironing.
19
GB