Suggestions Before Using The Iron For The First Time; Parts Directory; Technical Specifications - Fakir AVANTI Bedienungsanleitung

EN

Suggestions before using the iron for the first time

1. Certain parts of the iron have been lightly greased therefore the iron could give off a
little smoke when plugged in for the first time. This will cease after a short while.
2. Before using the iron for the first time , remove the plastic protector from the base(if it
has one) clean the base with a soft cloth.
3. Keep the base very smooth. Do not run it over metal objects (such as against the
ironing board, buttons , zips ,etc.)
4. Pure wool fibres (100% wool)can be ironed with the appliance in the steam position
by preference, select a high steam position and use a dry ironing cloth.
NOTE!
While assembling your product; you can realise that some water drop might be on the
water tank and the product body. This is caused by our quality tests which confirm the
100 % workability of the product. The product did not be used before and it is
produced to give you many years of trouble-free service.
CAUTION!
Do not operate another high wattage appliance on the same circuit, to avoid a circuit
overload.
If the appliance has been exposed to temperatures below 0°C for some time, it should
be kept at room temperature for at least 2 hours before using.

Parts Directory

A. Water tank
B. Temperature control dial
C. Power cord protector
D. Self cleaning button
E. Soleplate
F. Spray button
G. Burst steam button
H. Steam control button
I. Water inlet cover
J. Pilot lamp
K. Spray
L. Auto shut off indicator

Technical Specifications

2800 Watt
230 V
50/60 Hz
Usage Life: 7 Years
AVANTI
18