Suggestions Before Using The Iron For The First Time - Fakir FORTE Bedienungsanleitung

GB

Suggestions before using the iron for the first time

1. Certain parts of the iron have been lightly greased therefore the iron could give off a
little smoke when plugged in for the first time. This will cease after a short while.
2. Before using the iron for the first time , remove the plastic protector from the base(if it
has one) clean the base with a soft cloth.
3. Keep the base very smooth. Do not run it over metal objects (such as against the
ironing board, buttons , zips ,etc.)
4. Pure wool fibres (100% wool)can be ironed with the appliance in the steam position
by preference, select a high steam position and use a dry ironing cloth.
NOTE!
While assembling your product; you can realise that
some water drop might be on the water tank and the
product body. This is caused by our quality tests which
confirm the 100 % workability of the product. The
product did not be used before and it is produced to
give you many years of trouble-free service.
CAUTION!
Do not operate another high wattage appliance on the
same circuit, to avoid a circuit overload.
If the appliance has been exposed to temperatures
below 0°C for some time, it should be kept at room
temperature for at least 2 hours before using.
FORTE
16