Operation
Note: The product is not intended to be in
contact with food. Always use transparent
container having a flat bottom surface with
diameter not more than 12 cm so that the LC
display
included with the product.
Weighing
Set the product on a solid, lever and flat
surface to weigh.
Spread the product in a 90° angle
(see fig. A).
Place a container on the effective weigh-
ing area
Press the button
product. The LC display
displays for approx. 3 seconds.
During this time the weighing equipment
on the product is calibrating. Afterwards
the numerical display
reading. The unit display
44 GB/IE
is not covered. A container is not
3
of the product.
1
to switch on the
2
will show all
3
will show zero
7
will show the
8