Herunterladen Inhalt Inhalt Diese Seite drucken

Loading The Combi Heater With Stones; Heater Stones; Loading Stones Into The Heater - Sawotec SAVONIA COMBI Bedienungsanleitung

Elektrischer saunaofen
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

LoAdINg THE CombI HEATER wITH SToNES

The main purpose of the stones in the Combi Heater is to store enough energy to effi-
ciently vaporize the water thrown on top of the stones to maintain correct humidity in the
sauna room. The stones must be removed at least once a year or every 500 hours which-
ever occurs first. All stone crumbles must be removed from the heater then load new
stones as described hereinafter. To verify the required amount of stones, See page 29

HEATER SToNES

The main purpose of the stones in the heater unit is to store enough energy to efficiently
vaporize the water thrown on top of the stones to maintain correct humidity in the sauna
room. The stones must be removed at least once a year or every 500 hours whichever
occurs first. All stone crumbles must be removed from the heater unit and replaced with
new ones as described in the heater manual.
NoTE! Never use the heater without stones as it may cause fire. Use only manufacturer
recommended stones. Using unsuitable stones may lead to heating element damage and
will void the warranty. Never use ceramic stones or other artificial stones of any type!

LoAdINg SToNES INTo THE HEATER

It is recommended that all stones should be rinsed to remove any stains or dust that
can cause unpleasant odour during the first few times of using the heater. It is import-
ant that the stones are loaded carefully in a way that they do not block air circulation
through the heater. Larger stones that won't fit between the heating elements must not
be forced in place instead they must be completely removed. Small crumble or stone
pieces smaller than 35mm in diameter must not be loaded into the heater because they
will block the air circulation and will cause overheating and possible heating element
damage.
NoTE! Heating element damage due to overheating caused by wrong kind of stones or
stones which were wrongly loaded into the heater is not covered by the factory warran-
ty.
Abb 8
Aufladen der Steine
Fig. 8
How to load the heater stones
VERwENdEN SIE KEINE
KERAmIKSTEINE!
do NoT uSE CERAmIC
SToNES!
ENGLISH
21

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis