Hirschmann HiOS-3S RSP Referenzhandbuch Seite 2672

OSPF

Router A
 Explizite
permit
ip access-list extended name
OSPF-rule permit src any dst
any proto ip
 Eingerichtete Regeln prüfen.
show access-list ip
Index AclName
----- ---------------------------
1000 OSPF-rule
1000 OSPF-rule
show access-list ip OSPF-
rule 1
IP access-list rule detail
--------------------------
IP access-list index........................1000
IP access-list name.........................OSPF-rule
IP access-list rule index...................1
Action......................................Deny
Match every ................................False
Protocol....................................IP
Source IP address...........................8.1.4.0
Source IP mask..............................0.0.0.0
Source L4 port operator.....................eq
Source port.................................-1
Destination IP address......................255.255.255.0
Destination IP mask.........................0.0.0.0
Source L4 port operator.....................eq
Destination port............................-1
Flag Bits...................................-1
Flag Mask...................................-1
Established.................................False
ICMP Type...................................0
ICMP Code...................................0
--More-- or (q)uit
UM RoutingConfig HiOS-3S RSP
Release 6.1 09/2016
-Regel in Access-Control-Liste einfügen.
Einfügen einer
Subnetze in die Access-Control-Liste
Anzeige der eingerichteten Access-Control-
Listen und Regeln.
Anzeige der Regel
Access-Control-Liste
8.7 Verteilung der Routen mit ACL
-Regel für sämtliche
permit
RuleNo Action
------ ------
1 Deny
2 Permit
(explizite
1
OSPF-rule
einschränken
.
OSPF-rule
SrcIP
DestIP
-----------
8.1.4.0
255.255.255.0
0.0.0.0
0.0.0.0
-Regel) in
deny
.
127