Hirschmann HiOS-3S RSP Referenzhandbuch Seite 2668

OSPF
 Eingerichtete Regeln prüfen.
show access-list ip
Index AclName
----- ---------------------------
1000 OSPF-rule
show access-list ip OSPF-
rule 1
IP access-list rule detail
--------------------------
IP access-list index........................1000
IP access-list name.........................OSPF-rule
IP access-list rule index...................1
Action......................................Permit
Match every ................................False
Protocol....................................IP
Source IP address...........................8.1.2.0
Source IP mask..............................0.0.0.0
Source L4 port operator.....................eq
Source port.................................-1
Destination IP address......................255.255.255.0
Destination IP mask.........................0.0.0.0
Source L4 port operator.....................eq
Destination port............................-1
Flag Bits...................................-1
Flag Mask...................................-1
Established.................................False
ICMP Type...................................0
ICMP Code...................................0
--More-- or (q)uit
 Access-Control-Liste auf OSPF anwenden.
ip ospf distribute-list out
static OSPF-rule
UM RoutingConfig HiOS-3S RSP
Release 6.1 09/2016
8.7 Verteilung der Routen mit ACL
Anzeige der eingerichteten Access-Control-
Listen und Regeln.
RuleNo Action
------ ------
1 Permit
Anzeige der Regel (explizite
1
Access-Control-Liste
Anwenden der Access-Control-Liste
auf OSPF.
einschränken
SrcIP
DestIP
-----------
8.1.2.0
255.255.255.0
-Regel) in
permit
.
OSPF-rule
OSPF-rule
123