Hirschmann HiOS-3S RSP Referenzhandbuch Seite 2624

VRRP/HiVRRP
exit
exit
show ip vrrp interface 1/1 1
VRRP instance information
-------------------------
Admin State.................................... enabled
State.......................................... init
Virtual MAC Address............................ 00:00:5e:00:01:01
Base Priority.................................. 100
Current Priority............................... 100
Advertisement Interval (milliseconds).......... 100
Pre-empt Mode.................................. enable
Accept ICMP Echo Requests...................... enable
Preeption Delay (seconds)...................... 0
Advertisement Address.......................... 224.0.0.18
Notification Address........................... 0.0.0.0
Current Master Address......................... 0.0.0.0
Master Candidate Address....................... 0.0.0.0
Domain ID...................................... 1
Domain Role.................................... supervisor
Domain Status.................................. supervisor down
 Den Ring-Port als Mitglied des VLANs festlegen
enable
configure
interface 1/2
vlan participation include 11
exit
exit
show vlan id 11
UM RoutingConfig HiOS-3S RSP
Release 6.1 09/2016
6.3 HiVRRP-Domänen
Wechsel in den Konfigurationsmodus.
Wechsel in den Privileged-EXEC-Modus.
Zeigt die Konfiguration von VLAN
Wechsel in den Privileged-EXEC-Modus.
Wechsel in den Konfigurationsmodus.
Wechsel in den Interface-Konfigurationsmodus
von Interface .
1/2
Weist das Interface dem VLAN zu.
Wechsel in den Konfigurationsmodus.
Wechsel in den Privileged-EXEC-Modus.
Zeigt die Konfiguration von VLAN
.
11
.
11
79