Specifications - ABB TB82PH Bedienungsanleitung

ABB

SPECIFICATIONS

Property
Process Display Range
pH
ORP
pIon
Temperature
Power Requirements
Analog
HART Versions
PROFIBUS PA
FOUNDATION Fieldbus (FF)
Ambient Temperature Effect
pH
ORP
pION
Temperature
Maximum Sensor Cable Length
Environmental
Operating temperature
LCD Range
Storage temperature
Enclosure Classification
Size
Height
Minimum panel depth
Maximum panel cutout
Recommended panel cutout
Weight
2000
Figure 27 – Supply Voltage Requirements, HART and Analog Versions
TB82PH-ATEX-EN-B
Characteristic/Value
-2.00 to +16.00 pH
-1999 to +1999 mV
-1999 to +1999 mV
0 to 140°C
13.5 to 55 VDC (13.5 to 42 VDC for agency certified applications).
See Figure 27 below
14 to 55 VDC (14 to 42 VDC for agency certified applications).
See Figure 27 below
9 to 32 VDC (9 to 24 VDC for agency certified applications)
15 mA quiescent current
9 to 32 VDC (9 to 24 VDC for agency certified applications)
15 mA quiescent current
±0.007 pH/°C @ 95% Relative Humidity
±0.4 mV/°C @ 95% Relative Humidity
±0.4 mV/°C @ 95% Relative Humidity
±0.16°C/°C @ 95% Relative Humidity
100 ft (30.5 m)
-20° to 60°C (-4° to 140°F)
-20° to 60°C (-4° to 140°F)
-40° to 70°C (-40° to 158°F)
NEMA 4X
IP65
144 mm high x 144 mm wide x 171 mm long (5.67 in. high x 5.67 in. wide x 6.75 in.
long)
145 mm (5.70 in.)
136.7 mm x 136.7 mm (5.38 in. x 5.38 in.)
135 mm x 135 mm (5.33 in. x 5.33 in.)
1.9 kg (4.2 lb) without mounting hardware
3.4 kg (7.5 lb) with Pipe Mounting Hardware
2100
1800
1500
1200
900
600
300
250
0
14 19 24
13.5 18.5 23.5
Supply Voltage VDC
TB82PH ATEX Product Instruction Manual
HART
COMMUNICATIONS
RANGE
29 34 39 44 49
28.5 33.5 38.5 43.5 48.5
54 (HART)
53.5 (Analog)
21