Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Contents
1
2
Safety Notes . . . . . . . . . . . . . 18
3
Applications . . . . . . . . . . . . . . 19
Setting the Unit into Operation . . . . 19
4
4.1 Connections . . . . . . . . . . . . . . 19
4.1.1 DMX output . . . . . . . . . . . . . . 19
4.1.2 Audio input . . . . . . . . . . . . . . 19
4.1.3 MIDI connections . . . . . . . . . . . . 19
4.1.4 USB connection . . . . . . . . . . . . 19
4.1.5 Power supply . . . . . . . . . . . . . 19
4.2 Basic settings . . . . . . . . . . . . . . 20
4.2.1 Setting DMX channels . . . . . . . . . . 20
4.2.2 Assigning movement channels . . . . . . 20
5
Operation . . . . . . . . . . . . . . . 21
5.1 Direct control . . . . . . . . . . . . . . 21
5.1.1 Copying adjustments . . . . . . . . . . 21
5.2 Scenes . . . . . . . . . . . . . . . . . 22
5.2.1 Programming scenes . . . . . . . . . . 22
5.2.2 Calling up scenes . . . . . . . . . . . . 22
5.2.3 Deleting scenes . . . . . . . . . . . . 23
5.3 Programs (CHASE) . . . . . . . . . . . 23
5.3.1 Creating / extending programs . . . . . . 23
5.3.2 Calling up programs . . . . . . . . . . 23
5.3.3 Deleting / inserting program steps . . . . . 24
5.3.4 Deleting programs . . . . . . . . . . . 24
5.4 Movement patterns (MOVEMENT) . . . . 24
6
Additional Functions . . . . . . . . . . 25
6.1 Blackout . . . . . . . . . . . . . . . . 25
6.2 Interrupting DMX output . . . . . . . . . . . . .
(STAND ALONE) . . . . . . . . . . . 25
6.5 MIDI control . . . . . . . . . . . . . . 26
6.6 Resetting the unit . . . . . . . . . . . . 26
7
Specifications . . . . . . . . . . . . . 26
7.1 MIDI control commands . . . . . . . . . 27
16
DMX Controller
These instructions are intended for operators with
basic knowledge in DMX control . Please read
these instructions carefully prior to operation and
keep them for later reference .
All operating elements and connections de-
scribed can be found on page 2 .
1 Operating Elements and
Connections
1 Buttons to select scenes, each with a LED
indicator
When setting up the channels for movement
control, use the appropriate buttons while
keeping the button MODE (20) pressed to se-
lect the movement direction desired (
ter 4 .2 .2) .
2 Indicators A - D to indicate the current level
for the channels or scenes
3 Button PAGE to switch between the levels
(A - D) for the channels or scenes
4 Sliders to adjust the values for the channels
or to fade in and fade out scenes
5 Button SCENE / FIXTURE (with status LED) to
select light effect units or scenes:
LED lights up: the number buttons (17) can
be used to select light effect units
LED flashes: the buttons (1) or the sliders (4)
can be used to call up or fade in scenes
6 Button MOVEMENT (with status LED) to call
up a movement pattern by means of the num-
ber buttons (17)
7 Button CHASE (with status LED) to call up a
program (a sequence of steps the user has
programmed) by means of the number but-
tons (17)
8 LEDs to indicate the current control type for
replaying programs (CHASE); use the button
next to the LEDs to switch between the con-
trol modes
AUTO:
time-controlled replay, can be ad-
justed by means of the controls
FADE TIME (25), WAIT TIME (24)
or the button TAP (15)
MUSIC:
the replay is controlled by means
of an audio signal at the input
AUDIO (28) or by means of the
internal microphone
chap-
☞
Werbung
Kapitel
Inhaltsverzeichnis
