English - IKEA TRADFRI Bedienungsanleitung

ENGLISH

WIRELESS OPEN/CLOSE
REMOTE FUNCTIONS
UP: Press to move your wireless roller
blind up..
DOWN: Press to move your wireless roller
blind down.
Pairing: Add IKEA Smart products to your
system. See instructions below.
IMPORTANT NOTE: You need the Signal
Repeater to be able to steer your blinds with
the wireless Open/Close remote!
ADDING DEVICES TO YOUR
WIRELESS OPEN/CLOSE REMOTE
When the wireless Open/Close remote is sold
together with a wireless roller blind and a
Signal Repeater (in the same package), they
are already paired.
To add more wireless roller blinds, just repeat
the steps below:
Make sure that your wireless roller blind is
turned on.
1 Hold the Open/Close remote close to the
wireless roller blind you want to add (no
more than 5 cm away from
2 Short press on both buttons on the blind.
This will make the device awake and ready
for pairing for 10 seconds.
Press and hold the pairing button for at
least 10 seconds on the wireless Open/
Close remote.
You can find the pairing button under the
rear cover.
3 A red light will shine steadily on the Open/
Close remote. On your wireless roller
blind a white light will begin to dim and
flash one time to indicate that it has been
successfully paired.
Up to 10 wireless roller blinds can be paired
with 1 Open/Close remote.
Make sure to pair them one at a time. If
you have difficulties paring multiple blinds,
temporarily disconnect those that have
already been paired by removing the battery
cell inside. This will help with the pairing
process.
USING YOUR WIRELESS
ROLLER BLINDS
Move blind up to top position using Open/
Close remote
Press the up button once (short press) on the
Open/Close remote
Move blind down to preset level using
Open/Close remote
Press the down button once (short press) on
the Open/Close remote
Move up blind using Open/Close remote
Press and hold the up button on the Open/
Close remote
While pressing the button the blind is raised
(until wished position or top position has been
reached), if the button is release the blinds
stop.
Move down blind using
Open/Close remote
Press and hold the down button on the Open/
Close remote
While pressing the button the blind is lowered
(until wished position or max has been
reached), if the button is release the blinds
stop.
).
Move blind up to top position
using buttons on Blind.
Single press the Upper (Top) button on the
Blind until blind has reaches the top position.
Move blind down to preset level
using buttons on Blind.
Single press the Bottom (Lower) button on
the Blind until blind has reaches the bottom
position.
Move up blind using buttons on Blind.
Press and hold the Upper (Top) button on the
Blind.
Move down blind using
buttons on Blind.
Press and hold the Bottom (Lower) button on
the Blind
4