Operation - NSK iPex II Bedienungsanleitung

(5) To connect the lip hook
Connect the lip hook to the other plug of
the probe. (Fig. 4)
6

Operation

1) Pinch the file inserted in the root canal with the file clip. Pinch the upper part (near
the handle) of the file's metallic part.
2) Hang the lip hook on a corner of the patient's mouth.
3) Move the inserted file and measure the root canal length.
4) After use, press the Power Key for approximately one second or longer to turn
OFF the power. (The alarm sounds and the LCD panel turns off.)
●
NOTICE
5) Remove the file from the file clip.
6) Remove the lip hook and file clip from the probe.
●
CAUTION
10
After completing the operation, if the control unit is left unused
(with the Number Display indicating '- -') for about 10 minutes, the
power automatically turns OFF. (Auto power-off function)
Never hold the probe cord when removing the lip hook and file clip
from the probe. Be sure to hold the connector part.
Fig. 5
Fig. 4
Fig. 6