ChefsChoice Diamond Hone FlexHone/Strop 320 Bedienungsanleitung Seite 10

In the event post-warranty service is needed, return your sharpener to the EdgeCraft factory where
the cost of repair can be estimated before the repair is undertaken. Outside the USA, contact your
retailer or national distributor.
Please include your return address, daytime telephone number and a brief description of the problem
or damage on a separate sheet inside the box. Retain a shipping receipt as evidence of shipment and
as your protection against loss in shipment.
Assembled in the U.S.A.
This product may be covered by one or more EdgeCraft patents and/or patents pending as marked on the product.
®
Chef'sChoice , EdgeCraft
EdgeCraft Corporation, Avondale, PA.
Conforms to UL Std. 982 Certified to CAN/CSA Std. C22.2 No. 64
© EdgeCraft Corporation 2013
C13
EdgeCraft Corporation
825 Southwood Road, Avondale, PA 19311 U.S.A.
Customer Service (800) 342-3255 or 610-268-0500
® ®
, FlexHone/Strop and Diamond Hone
Certified to EN 60335-1, EN 60335-2, EN 55014-1+A1, EN 61000-3-2, EN 61000-3-3
SERvICE
®
are registered trademarks of
10
®
www.chefschoice.com
Printed in China
C328980