Connecting An Audio Component - Pioneer VSX-933 Bedienungsanleitung

Connecting an Audio Component

a b
OR
a Analog audio cable , b Digital coaxial cable
Contents
a
CD
Turntable
Connections
≫
This is a connection example of an audio component. Connect a CD player using
a digital coaxial cable or analog audio cable. You can also connect a turntable
that has an MM-type cartridge to the PHONO jack.
• If the turntable has a built-in phono equalizer, connect it to any of the AUDIO
IN jacks other than the PHONO jack. Further, if the turntable uses an MC type
cartridge, install a phono equalizer compatible with the MC type cartridge
between the unit and the turntable, and then connect it to any of the AUDIO IN
jacks other than the PHONO jack.
If the turntable has a ground wire, connect it to the
GND terminal of this unit.
35
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫