Connecting Using An Hdmi Cable - Pioneer X-HM32V-K Bedienungsanleitung

Connections
CAUTION
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Do not connect any speakers other than those supplied
to this system.
• Do not connect the supplied speakers to any amplifier
other than the one supplied with this system.
Connection to any other amplifier may result in
malfunction or fire.
• Do not attach these speakers to the wall or ceiling. They
may fall off and cause injury.
• These speakers are magnetically shielded. However,
depending on the installation location, color distortion
may occur if the speaker system is installed extremely
close to the screen of a television set. If this happens,
turn off the television set, and then turn it on after 15 to
30 minutes. If the problem persists, move the speaker
system away from the television set.
• Make sure that the speaker cable cores do not become
exposed and make contact with other cable cores. This
may cause malfunction of the product.
• Do not allow the speaker cable core to come into contact
with the receiver body.
- If the speaker cable core comes into contact with any
metal portion of the receiver's body, it may damage the
speakers and cause smoke and fire.
Insert speaker cables securely into the terminals and
check that the cable does not come out of easily.
Note
• There is no difference between L and R speakers.
This unit's rear panel
RS
Y
P
R
P
B
L
OUT
OUT
COMPONENT
VIDEO
HDMI
Component video cable
(commercially available)
To video input
terminal

Connecting using an HDMI cable

By using an HDMI cable, digital signals can be transferred to
an HDMI-compatible TV on a single cable with no loss of
picture or sound quality. After connecting, make this unit's
resolution and HDMI color settings according to the HDMI-
compatible TV. Also refer to the operating instructions with
the HDMI-compatible TV.
Note
• When playing a disc or USB storage device content, this
unit can transfer digital signals by the HDMI OUT
terminal. Use the video cable for playing other content.
• This unit's interface is designed based on the High-
Definition Multimedia Interface specification.
• When an HDMI-compatible device is connected, the
resolution is displayed on the front panel display.
• The resolution of the video signals output from this unit's
HDMI OUT terminal is changed manually. Change the
HDMI Resolution setting (page 37).
03
VIDEO
OUT
R
ANTENNA
L
FM
IN
UNBAL 75 Ω
LINE
Video cable
(supplied)
Yellow
TV
13
En