Pioneer VSX-933 Bedienungsanleitung Seite 86

Setting Item Default Value
Double Bass Off
„ Distance
Set the distance from each speaker to the listening position.
Setting Item Default Value
Front Left 10.0 ft/3.00 m
Center 10.0 ft/3.00 m
Front Right 10.0 ft/3.00 m
Height Left 10.0 ft/3.00 m
Height Right 10.0 ft/3.00 m
Surround Right 10.0 ft/3.00 m
Setting Details
This can be selected only when "Configuration"
- "Subwoofer" is set to "Yes" and "Front" is set to
"Large".
Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted
"Off": Bass output will not be boosted
• The setting will not automatically be configured
even if you performed Full Auto MCACC.
Setting Details
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
Contents Connections
≫
Setting Item Default Value
Surr Back Right 10.0 ft/3.00 m
Surr Back Left 10.0 ft/3.00 m
Surround Left 10.0 ft/3.00 m
Subwoofer 10.0 ft/3.00 m
• Default values vary depending on the regions.
• The unit of distance can be changed by pressing the MODE button on the remote
controller. When using the unit "feet", the setting is available in increments of 0.1 ft from
0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of
0.03 m from 0.03 m to 9.00 m.
86
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
Setting Details
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
• The setting cannot be changed if "Configuration"
- "Zone Speaker" is set to "Zone 2" and Zone 2
is on.
Specify the distance between each speaker and
the listening position.
Specify the distance between each speaker and
the listening position.
≫