Spotify; Playing Back - Pioneer VSX-933 Bedienungsanleitung

Spotify

By connecting this unit to the same network as mobile devices, such as a smartphone and tablet, you can enjoy music played with Spotify Connect wirelessly.
• To play Spotify Connect, install a Spotify application on your smartphone or tablet. Also, you need to obtain a Spotify premium account.
– For details of Spotify settings, go to:
www.spotify.com/connect/

Playing Back

Wi-Fi
Devices Available
Devices Available
Contents
Pioneer VSX-933 XXX
45
Connections
≫
1. Connect the mobile device to the access point where this unit is connected via
network.
2. Start up the Spotify application.
3. Play a track on the Spotify application, switch the screen to the playback
operation screen, and then tap "Devices Available" on the bottom of the
screen.
4. Select this unit.
5. This unit is automatically turned on, the input is switched to NET, and Spotify
will start the streaming playback.
• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is
set to "Off" in the Home, manually turn the unit on and then press NET on the
remote controller. In the factory default setting, the Network Standby function
( p93) is set to On.
Notes when using the multi-zone function
• To enjoy Spotify music in a separate room, select NET manually as the input
of the separate room. Then, select this unit on the Spotify application.
• Volume adjustment with the Spotify application is possible for speakers
connected to the ZONE speaker terminals or when the volume of the audio
device in a separate room is configured so that its volume can be adjusted on
this unit. In any other cases, adjust the volume on the audio device placed in a
separate room.
• To enjoy Spotify music in the main room after playing it in a separate room,
switch the input of the main room to NET.
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫