Turning On The Power - Yamaha CRX-N560 Bedienungsanleitung

Preparations

Turning on the power

Plug the power cable into the wall outlet
and press .
• The unit turns on.
• Press
again to turn off (standby mode).
• "Eco standby" (default) reduces power consumption of
the unit while limiting certain features (as shown in the
table on the right).
Canceling the eco standby
1
Press .
• Option menu is shown on the front panel display.
2
Cancel the eco standby.
• Set the item in the order of [System Config] -
[Power Saving] - [Normal].
• Change the item with
/ and press
3
Press to finish the option setting.
12
En
A
to set.
Status in standby/eco standby
Charging of iPod/USB devices
Enable/disable the wake-up
timer*
Operation of the source
Within 6 m buttons*
(20 ft)
CD load/eject
AirPlay
Power-on by the application
Clock display
A
* Operation with the remote control only
Option menu regarding power (System Config)
Power Saving
Configure the power supply settings.
1 3
,
(Normal, Eco)
OPTION
When you select [Eco], nothing is shown on the front
panel display in the eco standby mode.
Auto Power Off
Set the time at which the unit enters standby mode if no
2
operation is performed.
(Timer 2H, Timer 4H, Timer 8H, Timer 12H, OFF)
/ ,
ENTER
Standby Eco standby
—
—
—
—
—
(Setting value. Bold: default)