Installing The Ink Ribbon Cassette - Sony UP-D6500 Bedienungsanleitung

Installing the Ink Ribbon Cassette

This procedure describes how to install the ribbon
cassette in the printer.
Before beginning, obtain the required ink ribbon (sold
separately). The following types of ink ribbon are
available:
Color ink ribbon 5UPR-6040: 3-color CMY and
laminate
Color ink ribbon 5UPR-6080: 4-color CMYK and
laminate
Black ink ribbon UPR-6025: black only
• The 5UPR-6040/6080 ribbons provide lamination
along with color printing.
The color ink ribbon package consists of five pieces
in one set. One roll of 5UPR-6040 can print about
250 single-sided cards, and one roll of 5UPR-6080
can print about 200 single-sided cards.
• The UPR-6025 ribbon package consists of one unit
which prints black only. About 1,000 single-sided
cards can be printed.
1
Hold both sides of the front door, and pull it down
to open.
2
To change the ink ribbon, press on the part marked
PUSH to remove the ink ribbon holder.
When installing an ink ribbon in the printer the
first time, skip this step and proceed to step 4.
Note
Do not touch the inside of the ink ribbon holder
compartment. The print head inside the printer may
be very hot.
3
When changing the ink ribbon, remove the used
ribbon from the ribbon holder.
1 Remove take-up spool
When installing an ink ribbon in the printer the
first time, skip this step and proceed to step 4.
4
Install an ink ribbon in the ink ribbon holder.
1 Install the ink ribbon
supply spool.
2 Install the take-up spool.
2 Remove supply spool
Ink ribbon
Ink ribbon holder
Barcode ring
Preparation
11